Recent Posts

Showing posts with label FAQs. Show all posts
Showing posts with label FAQs. Show all posts

Excavator For Sale: A Comprehensive Buyers Guide

January 10, 2019 No comments:
Much to excavate but can’t find the right piece of machinery? Look no further. Kubota has been the industry leader in excavation since the s...
300+ Civil Engineering Interview Questions You must Prepare for

300+ Civil Engineering Interview Questions You must Prepare for

July 09, 2017 2 comments:
Applying for a Job in Construction and Civil Engineering industry and field is full of challenges and hardships. However, with proper planni...
how should the guided bearings in piers of the curved region be oriented with respect to the fixed bearing in abutment?

how should the guided bearings in piers of the curved region be oriented with respect to the fixed bearing in abutment?

May 27, 2016 No comments:
To determine the orientation of guided bearings, one should understand the movement of curved region of a prestressed bridge. Movement of p...
What are the advantages of piers constructed monolithically with the bridge deck over usage of bearings?

What are the advantages of piers constructed monolithically with the bridge deck over usage of bearings?

No comments:
Basically, piers constructed monolithically with the bridge deck are advantageous in the following ways: (i) Movement of the bridge deck i...
Are diaphragms necessary in the design of concrete box girder bridges?

Are diaphragms necessary in the design of concrete box girder bridges?

No comments:
Diaphragms are adopted in concrete box girder bridges to transfer loads from bridge decks to bearings. Since the depth of diaphragms normal...
What is the advantage of sliding bearings over roller bearings?

What is the advantage of sliding bearings over roller bearings?

No comments:
In roller bearing for a given movement the roller bearing exhibit a change in pressure centre from its original position by one-half of its...
Why is the span length ratio of end span/approach span to its neighboring inner spans usually about 0.75?

Why is the span length ratio of end span/approach span to its neighboring inner spans usually about 0.75?

No comments:
From aesthetic point of view, an odd number of spans with a decrease in length in the direction of abutment is desirable. Moreover, spans ...
In the design of a simply supported skew bridge, which direction of reinforcement should be provided?

In the design of a simply supported skew bridge, which direction of reinforcement should be provided?

No comments:
In the conventional design of steel reinforcement for a simply supported skew bridge, a set of reinforcement is usually placed parallel to...