What is the difference between working stress approach and limit state approach?


What is the difference between working stress approach and limit state approach?


TwitCount Button
For working stress approach, service loads are used in the whole design and the strength of material is not utilized in the full extent. In this method of design, stresses acting on structural members are calculated based on elastic method and they are designed not to exceed certain allowable values.

In fact, the whole structure during the lifespan may only experience loading stresses far below the ultimate state and that is the reason why this method is called working stress approach. Under such scenario, the most economical design can hardly be obtained by using working stress approach which is now commonly used in the design of temporary works.




For limit state approach, for each material and load, a partial safety factor is assigned individually depending on the material properties and load properties. Therefore, each element of load and material properties is accurately assessed resulting in a more refined and accurate analysis of the structure.

In this connection, the material strength can be utilized to its maximum value during its lifespan and loads can be assessed with reasonable probability of occurrence. Limit state approach is commonly used for the majority of reinforced concrete design because it ensures the utilization of material strength with the lowest construction cost input.

Keywords for this post 


difference between working stress and limit state method
difference between working stress method and limit state method of design
difference between working stress method and limit state method pdf
difference between limit state method and working stress method ppt
working stress method wiki
advantages of limit state method
working stress method of rcc design
working stress method definition


Hurry Up !!! - Just join the 10k+ fans of ours on Facebook and get real updates Iamcivilengineer

What is the difference between working stress approach and limit state approach?


Like this article? Subscribe to stay updated!

Previous
Next Post »

According to our Terms of Service, all the contents provided in this website is on internet and we never upload the contents on the web, moreover all the content is for educational purpose which must not be used for commercial or any other way. If you don't agree to this you must not use any of the material because all of these are the copyright of the respective owners. In case you think any of the content should not be provided like this you can openly say it to us for immediate shut down of that link"